04/23/2024 – 17:21
The Ministry of Development, Industry, Commerce and Services (MDIC) released this Tuesday, the 23rd, the list of steelmaking items that will have an import quota, with a 25% tax on those exceeding the volume.
Below, the list of the 11 NCMs (Common Mercosur Nomenclature), in addition to the four items that will still be analyzed by the government:
– 7210.61.00: Flat rolled products, of iron or non-alloy steel, with a width of 600 mm or more, coated with aluminum-zinc alloys
– 7210.49.10: Flat rolled products, of iron or non-alloy steel, of a width equal to or greater than 600 mm, clad or plated, or coated, galvanized by another process, of a thickness of less than 4.75 mm
– 7209.16.00: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad or coated, in rolls simply cold-rolled, of a thickness exceeding 1 mm but less than 3mm
– 7209.17.00: Flat-rolled products, of iron or non-alloy steel, of a width of 600 mm or more, not clad or coated, in rolls simply cold-rolled, of a thickness of 0.5 mm or more , but not more than 1 mm
– 7208.37.00: Flat-rolled products, of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad or coated, in rolls, simply hot-rolled, of a thickness equal to or greater to 4.75 mm but not more than 10 mm
– 7208.38.90: Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad or coated, in rolls, simply hot-rolled, of a thickness of 3 mm or more , but less than 4.75 mm
– 7208.39.10: Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad or coated, in rolls, simply hot-rolled, of a thickness of less than 3 mm, with a minimum yield limit of 275 MPa
– 7208.39.90: Other flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, not clad, plated or coated, in rolls, simply hot-rolled, of a thickness of less than 3 mm
– 7213.91.90: Other wire rods of iron or non-alloy steel, circular in section, with a diameter of less than 14 mm
– 7305.11.00: Pipes of the type used in oil or gas pipelines, welded longitudinally by immersed arc, of circular section, with an outer diameter greater than 406.4 mm, of iron or steel
– 7305.12.00: Other pipes of the type used in oil or gas pipelines, longitudinally welded, circular in section, with an outer diameter greater than 406.4 mm, of iron or steel.
The following NCMs were kept on the Gecex agenda for additional analysis:
– 7304.19.00: Other hollow seamless tubes and profiles, of iron or steel, of a kind used in oil or gas pipelines
– 7304.29.39: Other alloy steel tubes, uncoated, seamless, for well casing, etc.
– 7306.19.00: Other pipes of a kind used in oil or gas pipelines
– 7306.69.00: Other welded tubes of other sections.
#MDIC #announces #NCMs #steel #industry #import #quota