Keeping your car clean is important not only for aesthetics, but also for long-term care. The limestone it is one of the main enemies of the bodywork, since it can leave rings and stainscompromising the appearance of the paint and causing permanent damage over time. To remove limescale from the bodywork, it is essential to use a specific product.
In this one car care guide we show you which one to use and how to do it correctly.
Which product for the car against limescale
The new Descale Foam Shampoo of the line Maniac Line of Ma-Fra it is the ideal product to protect the car bodywork from limescale. This is one anti-limescale shampoospecifically formulated to effectively and safely remove all limescale residues that can accumulate on the bodywork due to atmospheric agents, such as sandy rain or snowand also following practices of incorrect washing or drying. These mineral deposits not only compromise the aesthetics of the vehicle, but they can also damage the paint over time, making it opaque.
Descale Foam Shampoo carries out an effective descaling action, helping to restore the shine of the paint. This 2-in-1 acid shampoo not only eliminates limescale contamination that dulls the bodywork, but also helps maintain the effectiveness of sealants and coatings nanotechnological already applied.
How to clean your car with Descale Foam Shampoo
To remove limescale using Descale Foam Shampoowe recommend using a foam gun or a manual nebulizer such as Nebula Foam 2.0. The foam gun produces dense foam that uniformly covers the bodywork; the product must be diluted 1:5 for intense dirt and 1:10 for light soiling or maintenance washing.
Nebula Foam 2.0while creating a lighter foam, is equally effective: diluting is recommended 1 capful of product in 1 liter of waterusing the orange nozzle provided.
Before applying the Descale Foam Shampoo, it is essential to pre-wash with Neutral Foam Shampoo for normal dirt or Foam Gun PreWash for stubborn dirt, in order to improve the effectiveness of limescale removal.
We recommend using the Pillow Foam techniquewhich plans to cover the car with one uniform layer of foam highly lubricated. This creates a “cushion” that protects the bodywork from scratches and facilitates the removal of dirt.
In the washing phase, it is not necessary to rinse off the foam. They can be diluted 3 to 5 caps by Descale Foam Shampoo in 5 liters of water In the Wash bucketand wash with a microfiber glove Double Face or a microfiber pad Comfort Car Wash Pad.
If necessary, lubrication can be increased by adding 1-2 caps by Descale Foam Shampoo. For the most difficult dirt, such as that caused by sandy rainwe recommend adding 3 caps for enhanced cleansing action.
Finally, rinse thoroughly with water and dry the car with a microfibre cloth SuperDryerknown for its high absorption capacity, which guarantees excellent performance and easy handling during drying.
Tips for removing limescale from your car
Car washing should always be done in the shade and on cool surfaces to prevent the products from drying out too quicklycompromising the effectiveness of the wash. It is advisable to wash on as soon as possible if a lot of limescale has accumulated, to prevent the stratification of dirt.
Descale Foam Shampoo It can also be used for maintenance circlesdiluting it 1:10. After cleaning the rims with Wheel & Tire Cleanerthe shampoo should be sprayed and left to act for a few seconds before rinsing and drying well. A must be used on the rims soft bristle brush to reach difficult areas.
To clean the underside of the car, it must be diluted Descale Foam Shampoo 1:10, sprayed on the surface and left to act. Then proceed with the Pillow Foam technique and rinse with water.
If, after washing, limescale stains remain, you can use the Water Spot Mineral Remover for targeted treatments. This product dissolves i mineral deposits without damaging the bodywork or chrome surfaces. Apply the product on the stain, leaving it to act for 30-60 secondsthen you use a soft bristle brush to facilitate mechanical action.
It is rinsed thoroughly and dried with a clean microfiber cloth. In case of persistent stains, the treatment must be repeated, avoiding the product from drying on the surface.
How to wash your car well, Maniac Line training
Maniac Line is the Ma-Fra line designed for true car care enthusiasts, for a detailing with professional services within everyone’s reach. The line, in constant evolution, currently consists of 15 products for cleaning and treating exteriors and interiors.
Maniac Line by Ma-Fra is not just a line of products super professionalbut also a real school to learn how to wash the car correctly.
With the Maniac Line training it is possible to become true detailing experts. Each course concerns a specific topic of car care: Pre-wash, Decontamination, Washing, Polishing and Protection, Finishing, Leather, Fabric and Carpet Cleaning, Plastic Protection and Glass Cleaning. Maniac Line courses are available online.
Read also:
→ Ma-Fra products and advice for car care
→ How to become a car detailer with Maniac Days
→ What do you think? Drop by discussions on the FORUM!
#protect #car #limescale #product